My tire here was made the 29th week of 2010 |
As you can see from the date stamp, I figured we should have another year or so before we needed to replace our tires. We have 6 tires that were made in the 8th week of 2010, and 2 tires that were made the 29th week of 2010, only about 4 years old. We had hoped to do our Alaska trip with its approximate 10,000 plus miles and then next spring look into new tires.
This shows the checking pretty well |
That made me take a closer look, and I found that all but one tire have a significant, at least to me, amount of checking. I called Michelin and talked with them about the issue and they said I needed to have the tires inspected to see if it could be a problem. I called a couple Michelin truck tire dealers in the area and one of them offered to come to us to inspect the tires. Fantastic! Well he showed up yesterday, agreed that they shouldn't be checking this much at this age, and we are awaiting his findings and deliberations with Michelin. In the meantime I decided to look into new tires.
These are pretty big tires, 295/80R22.5, and I might add pretty expensive. We belong to FMCA, Family Motor Coach Association and one of the perks is their Michelin Tire buying program which offers a significant discount on tires, but only Michelins. If Michelin does find something wrong with my tires and steps up to the plate we will put Michelins back on. We had been very pleased up until now. In the meantime though I looked at Continentals and Bridgestones that according to various forums get good reviews as well. We don't want to go to a inexpensive Chinese tire. That's not to start an argument as there are a lot of satisfied customers according to various reports, but for us it is not a player. We then found out there is a nationwide shortage on our particular tire in our size a XZA2 Energy tire which might be a challenge if we need tires ASAP, but we just learned Michelin has come out with a new motorhome tire that we are looking into, the X Coach HL Z. This new tire looks promising, it is very similar to our present tire but has more weight capacity at the same pressures, which means we would be able to support our weight with a lower pressure which would mean a softer ride.
So that's where we are right now, waiting to hear if Michelin will kick in some warranty money, can we find new tires and get them put on, all before we are scheduled to leave in about 2 weeks?? Tick, tick, tick.
2 comments:
Brother Bill, next to fuel and labor, tires are a very expensive part of the trucking world, and lets face it you are operating a truck. Steer axle tires were the most expensive because you are not allowed by law to run re-caps/re-treads. We would get about 80-90,000 out of the steers and 150,000 out of the rears. The stiffer sidewall (Mich HL Z)tire may be a good choice for you since you are not looking for off road grip, unlike a mixer or dump truck. We had good luck with the Michelins but found them expensive. Most of our fleet had Generals in the back and either Bridgestones or Yokahama on the front axles. This is owing to what makes a good drive tire is not always the best choice for the steer axle. Continental owns General and I think most of the truck tires are made in western Ohio. Michelin I am sure has a discount program for tires that "checked" out early where they will give you a significant discount toward a new set. They will probably give you a national discount so if you wait and are away from home base in FL you can have them changed by any authorized dealer. If you want to wait till May 3rd or so I can hook you up with my old tire guy in Erie. NO Goodyears!
Appreciate the info. FMCA has a buying program for Michelin, about $150 off each tire, which I took advantage of when I bought these. I also found out Conti has a buying program as well, although I don't have prices on it. A lot of folks that I converse with on one of my forums run Bridgestone and are happy, but I found out for the same carrying capacity they need an extra 5# of air so to get the maximum which I need on my steer I would need 125# which is above the max for my wheel! I hope to hear soon from Michelin to see what they say. I have my fingers crossed. Oh, and there is going to be a change of plans on Erie for us. :-(
Post a Comment